FEATURES: Six model memory, four character model naming
          Multiple swash plate styles, data reset, trainer capability, EPA,
            exponential and digital trims
          Data Input Lever allows easy setting of end points and rates for all
            six channels
          Five-point adjustment with two curves on both Throttle Curve, Pitch
            Curve, Normal and Idle Up
          Rate selection on both gyro mixing and revo mixing
          Small speaker in face plate emits audio alarms
          Throttle Hold switch for performing autorotation maneuvers and
            reducing idle for starting

INCLUDES: 6EXH 6-Channel Transmitter with crystal
          R138DP PCM Receiver with crystal, FUTL0803, FUTL0803
          Four S3151 Servos, FUTM0310
          NT8F600B 600mAh Transmitter Battery, FUTM1440
          NR-4RB 1000mAh Receiver Battery, FUTM1380
          FBC-19B (4) Wall charger, FUTM1830
          Switch Harness, FUTM4370
          Neckstrap, frequency flag set, servo mounting hardware with extra
            servo horns

REQUIRES: Charging batteries overnight

SPECS:    Transmitter
            Modulation: FM (PPM) and PCM 1024
            Power Supply: 9.6V NT8S600B NiCd battery or 12V alkaline battery
            Current Drain: 250mA
          R138DP PCM Receiver
            Narrow Band: 20kHz
            Intermediate Frequency- 1st IF: 10.7MHz
                                    2nd IF: 455kHz
            Power Requirements: 4.8 to 6.0V (shared with servos)
            Current Drain: 13mA
            Length:   2.50" (63.5mm)
            Width:    1.38" (35.0mm)
            Height:   0.88" (22.0mm)
            Weight: 1.75 oz (50 g)
          S3151 Servo
            Speed:       0.21 sec/60 degrees at 4.8V
            Torque:      43.1 oz-in @ 4.8V
            Dimensions: 1.59x0.79x1.42 in (40.6x20x36mm)
            Weight: 1.48oz (42g)