Model Trains
|
Giga Crusher Nitro KIT 1 x .26 Motor
40 MPH
Order 31141
HERE
See
movie HERE
The Giga Crusher SF is loaded with a .26 engine that delivers the brute power
to drive the huge tires over just about anything.
The SF is equipped with a full time 4WD system that included differentials front
and rear with a slipper clutch attached! This ensures a smooth power delivery of
the powerful .26. Add to this the 3-speed automatic transmission with its
optimal gear ratio to make the most of the engine's power range and you have the
power and torque to get over anything.
Long stroke, 4-wheel double-wishbone independent suspension promises even the
largest jumps will be soaked up time after time! If you decide to use a
3-channel radio, you can take advantage of the reverse gear box included in this
kit.
When it comes to Monster Truck fun, look no farther than the Giga Crusher SF!
Unprecedented
mechanical specs: GS26 engine (with recoil starter) + Center Divided Shaft Drive
4WD + 3-Speed Automatic Transmission
3-channel radio allows the use of reverse gear. (radio not included)
Main components (3-speed transmission, Diff. Reversing Transmission, Clutch
etc.) are all factory assembled.
Simply complete the body by painting and applying the decals.
Patent pending! 3mm thick aluminum main chassis plate + reinforced resin side
frames in high-rigidity chassis.
Suspension system that supports that sub-frame and improves the chassis' overall
rigidity.
Equipped with slipper clutch that protects the power train and delivers optimal
traction.
A front-mid mounted engine realizes almost perfect 50 : 50 weight distribution.
The concentration of mass produces the agility and sharp acceleration
capability.
Equipped with 29 precision ball bearings throughout the drive system. High
efficiency transfer of engine power straight to the ground.
Tuned pipe to draw maximum power from the engine is a standard feature. Also
able to be fitted with the optional rubber silencer for increased noise
suppression.
Air cleaner with internal air scoop provides excellent carburetor protection.
Twin oil shocks fitted on each wheel support 4-wheel double-wishbone suspension.
Die-cast brake caliper produces reliable and effective braking.
Front hub and knuckle produce almost zero scrub so standard high-torque servos
can deliver nimble steering.
Equipped with special radio box with separate compartments for receiver and
batteries.
Un-assembled KIT. Requires radio with servos, AA batteries and assembly
Specifications
|
Length: |
534mm / 21 in. |
Width: |
425mm / 16.73 in.
|
Height |
280mm / 11.02 in.
|
Ground Clearance
|
50mm |
Wheelbase |
315mm- 326mm / 12.4 in - 12.8 in.
|
Track Width F/R
|
325mm / 12.8 in.
|
Gear ratio: |
25.36/19.52/15.44:1 |
Tire size: |
160mm x 100mm |
Total Weight |
5,650g approx / 12.4 lbs. |
Motor |
1 x GS-26 with pull-start
|
To order 31141B
Giga Crusher .26 KIT 1/8
|
|
|
Click on logos to get Brand pages |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NEWS RSS FEEDS |
|
|