1/8 GP 4WD STADIUM TRUCK
INFERNO ST-RR
Get the winning edge in Truggy
racing with the new “RR” version.
Yuichi Kanai’s turbo-charged design sets the
standard for success even higher.
Main chassis is 25mm longer than the
previous ST-R version and includes
longer torque rod. Optimal center of
gravity produces sensational handling
performance. |
|
Big bore shocks provide excellent
damping power and suck up the big hits
with ease. Dust boots keep the moving
parts of the shocks free from dirt etc
for optimal performance. |
|
Includes 6 universal shafts:
left/right axles on front and rear, and
center front and rear. Also 28g lighter
than the ST-R which only included
front/rear universals. Promises improved
drive efficiency and reliability. |
A low-height body design uses reduced
front projectional area for low wind
resistance and better aerodynamics.
Generates powerful downforce. |
|
Long wing stay promises constant
downforce around the rear axle. Delivers
optimal aerodynamic performance when
combined with the special body. |
|
Wide wheel hubs add another 18mm in
width compared to the ST-R and the wheel
nuts have nylon thread coating so the
wheels are fixed tight for reliability
and maintenance. |
- Shaft-driven 4WD machine based on the
Inferno MP777 chassis.
- Complicated fraise processing and hard
anodized finish delivers rigidity and
strength, but with light weight.
- New material composition used for the
final gear and differential pinion gear in
the spiral gears results in dramatically
enhanced durability.
- Machine cut suspension plate and
steering plate.
- Clear poly-carbonate body
|
|
＜ Required for
operation ＞
- 2-channel, 2-servo R/C system
for cars
- Engine / 21- 28 class engine (P
type) for cars
- Manifold and tuned muffler
- Tires and inner sponges
- Fuel, engine starting tools
- Paint for body
- Batteries for R/C system
- No.96176 HG Air Cleaner Oil
|
|
Length |
575mm |
|
Width |
428mm |
|
Height |
210mm |
|
Ground
Clearance |
50mm |
|
Wheelbase |
373～378mm
|
|
Tread
(F/R) |
353/353mm |
|
Tire(F/R) |
(sold separately)
|
|
Gear
Ratio |
16.54：1 |
|
Weight |
4,300g (approx.)
|
|
Engine |
21～28 class engine (P-type) with
rear exhaust (sold separately) |
|
Buy 31353b HERE
